Уведомления

Прошу регистрируйтесь на сайте, это позволит вам писать комментарии, задавать вопросы на форуме.

Fault code: 9217 SCANIA

×
Введите Ваши учётные данные:





×

Регистрация

Зарегистрируйтесь







Восстановление пароля

Введите почту



×

Личный кабинет


Показывать вашу почту?
Измените пароль


Дополните данные
Получать рассылку новостей с сайта.
Участвовать в чате (Быть видемым на странице сообщество).



Показывать ваш телефон?



мужчина

женщина

Показывать ваши остальные данные?

Задать вопрос администратору.

Для отправки сообщения подтвердите почту

×


";

Finding the fault code

Enter the fault code





Fault code 9217

For this fault code there are several descriptions depending on the system to which this code refers and its version or version of this system that is installed on the machine

EMS Engine Management System

Oil pressure sensor

Error identification:

The voltage in the circuit has been below the permitted level.

Cause:

Possible causes are:

• Short circuit in oil pressure sensor circuit.

• Fault in the fuel temperature sensor circuit or mass flow sensor circuit.

Notes:

There is a common voltage supply for the oil pressure sensor, fuel temperature sensor and mass flow sensor. If a fault occurs in one of the sensors, the other sensor circuits may be affected.

If the voltage is outside the permitted range, the control unit uses a pre-programmed value.

The oil pressure gauge in the instrument panel displays 0 bar, irrespective of engine speed. The oil pressure lamp does not come on.

Action:

Check the oil pressure sensor, fuel temperature sensor and mass flow sensor, along with the harness-to-harness connectors and electrical cables in the circuits.

EMS Engine Management System

Oil pressure sensor

Error identification:

The voltage in the circuit has been below the permitted level.

Cause:

Possible causes:

• Short circuit in oil pressure sensor circuit.

• Fault in the fuel temperature sensor circuit or mass flow sensor circuit.

Notes:

There is a common voltage supply for the oil pressure sensor, fuel temperature sensor and mass flow sensor. If a fault occurs in one of the sensors, the other sensor circuits may be affected.

If the voltage is outside the permitted range, the control unit uses a pre-programmed value.

The oil pressure gauge in the instrument panel displays 0 bar, irrespective of engine speed. The oil pressure lamp does not come on.

Action:

Check the oil pressure sensor, fuel temperature sensor and mass flow sensor, along with the harness-to-harness connectors and electrical cables in the circuits.

Коментарии

Новый комментарий

Новый коментарий

Для написания необходимо зарегистрироваться и подтвердить e-mail

";