Прошу регистрируйтесь на сайте, это позволит вам писать комментарии, задавать вопросы на форуме.
мужчина
женщина
The voltage in the circuit has been below the permitted level.
Possible causes are:
• Short circuit in the fuel temperature sensor circuit.
• Fault in the oil pressure sensor circuit or mass flow sensor circuit.
There is a common voltage supply for the fuel temperature sensor, oil pressure sensor and mass flow sensor. If a fault occurs in one of the sensors, the other sensor circuits may be affected.
If the voltage is outside the permitted range, the control unit uses a pre-programmed value.
Check the fuel temperature sensor, oil pressure sensor and mass flow sensor, along with the harness-to-harness connectors and electrical cables in the circuits.
Для написания необходимо зарегистрироваться и подтвердить e-mail