Прошу регистрируйтесь на сайте, это позволит вам писать комментарии, задавать вопросы на форуме.
мужчина
женщина
The voltage in the circuit has been outside the permitted range.
Open circuit in the temperature sensor circuit after the catalytic converter.
If the voltage is outside the permitted range, the control unit uses a pre-programmed value at -273°C.
The fault causes reductant injection to be switched off.
Check the circuit components, harness-to-harness connectors and electrical cables.
Measure the resistance of the sensor. If the temperature is between 10 - 30°C, the resistance should be approximately 207 - 222 ohms.
Для написания необходимо зарегистрироваться и подтвердить e-mail