Fault code: 17153 SCANIA

Error identification:

Incorrect or unreliable data.

Cause:

Possible causes:

• Fault in fan circuit.

• Internal fault in the EMS control unit

The fault code can be set as a result of one of the fault codes 12800, 58880, 58881 or 57344-57350 being set.

Notes:

While the fault is active, the engine control unit shuts off the fuel supply using the solenoid valves. This often results in short malfunctions or, where the fault is active over an extended period of time, the engine stopping. Fault code 17155 will also be generated.

Action:

1. Check the fan circuit.

2. Clear the fault code memory and run the vehicle for approx. 10 minutes. Check whether the fault code has been regenerated.

3. Renew the fan cable harness if the fault code is regenerated.

4. Renew the EMS control unit if the fault remains.

Error identification:

Incorrect or unreliable data.

Cause:

Internal fault in the control unit. The fault code can be set as a result of one of the fault codes 12800, 58880, 588810 or 57344–57350 being set.

Notes:

While the fault is active, the engine control unit shuts off the fuel supply using the solenoid valves. This often results in short malfunctions or, where the fault is active over an extended period of time, the engine stopping. Fault code 17155 will also be generated.

Action:

Clear the fault code memory and run the vehicle for approx. 10 minutes. Check whether the fault code has been regenerated. If the fault code has been regenerated, renew the control unit.