Fault code: EMS 16384 SCANIA

Error identification:

Incorrect or unreliable data.

Cause:

Internal fault in the control unit.

Notes:

The fault results in 0% throttle actuation and a limp home speed of 750 rpm. Engine speed, coolant temperature and oil pressure are no longer displayed.

The starter motor cannot be controlled as long as the fault is active.

If the control unit starts to function normally again, a shutdown check must first be carried out before it will regard the fault as inactive. Shutdown check means that the control unit carries out an operational test after the power has been switched off using the key.

Action:

Clear the fault code memory and turn off and on the power with the starter key. If the fault code recurs, renew the control unit.